Bagnomaria LAUDA Hydro H 20 S
Water bath with stirring and cooling...
Water bath with stirring and cooling...
Water bath with stirring and cooling...
Water bath with stirring and cooling...
Water bath with stirring and cooling...
Bagnomaria LAUDA Hydro H 20 S
Water bath with stirring and cooling LAUDA Hydro H 20 SOW
Water bath with stirring and cooling LAUDA Hydro H 20 SOW
Water bath with stirring and cooling LAUDA Hydro H 20 SOW
Water bath with stirring and cooling LAUDA Hydro H 20 SOW
Water bath with stirring and cooling LAUDA Hydro H 20 SOW

Water bath with stirring and cooling LAUDA Hydro H 20 SOW

L002910
Delivery in 20/30 days
€4,330.00
VAT excluded
  • Price including VAT: €5,282.60
    Taxes calculated 22%. Pls. keep in mind, taxes vary by country: France taxes will be 20%, in Spain 21% etc., out EC 0% and if you are a company always 0%

23.1 liter shaking water bath with cooling system. Digital temperature regulation and LED display. Orbital shaking. Temperature from 25 to 80°C (from 10 to 80°C with active cooling).

Request an offer from our product manager or visit our blog.
Richiedi un offerta_Jointlablink al blog

Description

Water bath from 25°C to 99.9°C for the laboratory
The shaking water baths of the LAUDA Hydro series stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature.

The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers.

Qualitative characteristics

  • Digital regulation of the temperature and indication via LED display
  • Load-independent, continuously variable stirring with soft start
  • Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection
  • Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel
  • No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples

Operation
All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom.
The drain valve is located on the rear side.

Controllers
The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops.
The menu will guide you on how to use the bain-marie correctly.

Esempi applicativi

  • Bacteriological tests
  • Molecular biology
  • Demulsivity studies
  • Processing of chemical reactions
  • Thawing
  • Metallurgical analyses
  • Incubation of microbiological assays
  • heating reagents
  • Environmental studies
  • Food Processing (QC)
  • Water quality research
  • Cytochemistry

Accessories available
Water level regulator.

Operator placing a rack of samples into a laboratory stirring water bath
interior of the water bath tank in stainless steel

The heating element is located directly under the sieve plate for even temperature distribution in the tank.

display for temperature control

Electronic monitoring of the temperature regulator.
Two independently operating temperature fuses.

display for agitation control

Improved visual and audible alarms for increased sample safety.
Control elements tilted back for increased splash protection and improved operating comfort.

stirring a beaker inside the laboratory bain-marie tank
  • Perforated plate to place the glassware directly on the bottom.
  • Fill mark max. to prevent overflows.
  • Easy removal of sieve plate for cleaning.
interior of the water bath

Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate.

Internal stainless steel tray design

Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning.

Recommended accessories

- Water level regulator.
Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

operation of the water level regulator

Product Details

Temperature °C
from 25° to 80°C; with cooling system from 10 ° to 80 ° C
External dimensions mm L x P x A
632 x 500 x 390
Tank volume l
8.5 L min.
23.1 L min.
Temperature stability
+/- 0,1 K
Power W
1.5 kW
Series
Hydro
Bath measures WxDxH (mm)
450x300x160
Shaking Motion
orbital
Shaking Frequency
10 - 250
Shaking Amplitude mm
14
Weight kg
35
Supply
230 V / 50-60 Hz

Attachments

Related posts

Options or connected products

Product added to compare.