LAUDA ECO E 40 S heating thermostat
LAUDA ECO E 40 S heating thermostat
LAUDA ECO E 40 S heating thermostat
LAUDA ECO E 40 S heating thermostat
LAUDA ECO E 40 S heating thermostat
LAUDA ECO E 40 S heating thermostat

LAUDA ECO E 40 S heating thermostat

L001089
Delivery in 20/30 days
€3,556.00
VAT excluded
  • Price including VAT: €4,338.32
    Taxes calculated 22%. Pls. keep in mind, taxes vary by country: France taxes will be 20%, in Spain 21% etc., out EC 0% and if you are a company always 0%

Heating immersion thermostat with programming. Equipped with 40-litre stainless steel tank, LAUDA.

Request an offer from our product manager or visit our blog.
Richiedi un offerta_Jointlablink al blog

 

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions
LAUDA ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard.

A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation.

  • Monochrome LCD graphic display for simultaneous indication of actual and set values
  • The circulation pump can be adjusted to six levels
  • Integrated programmer: 1 program with max. 20 segments
  • Fully electronic continuous regulator with PID action
  • Additional key Tmax for overtemperature protection
  • The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C
  • The most powerful units are equipped with the energy-saving LAUDA SmartCool system
  • Variants in 230V; the 50 Hz are also available with natural refrigerants
  • Convenient operation with softkey cursor
  • Safety class III for operation with flammable and non-flammable liquids.
  • mini-USB interface
  • Pump connections with 13mm plastic nipples as standard

LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe.

graph of the temperature reached by the thermostats over time

Heating performance graph of ECO Silver immersion thermostats with stainless steel tank.

graph of pump pressure versus flow

Performance graph of the pump pressing on the six levels.

measurements of the ECO E 40 S LAUDA heating thermostat

APPLICATIONS WITH ECO LAUDA THERMOSTATS

Preparation of laboratory samples: homogenization, extraction, purification and concentration.

Analysis: Temperature is a decisive factor for the reproducibility of results in analysis processes. Thanks to Lauda thermostats you can cover a wide variety of applications and needs.

Fermentation: natural substances, such as antibiotics, or biopharmaceutical drugs (insulin), can be produced with the help of microorganisms in a cost-effective way and in large quantities thanks to fermenters. Accurate temperature control of fermentation environments is crucial to its success. LAUDA thermostats are used for this purpose.

Botanical Extraction: Temperature control is necessary in botanical extraction to release bioactive compounds, improve the solubility of ingredients, and accelerate the extraction rate. Equipping yourself with a heating thermostat with a wide temperature range will allow you to extract with multiple plants, always obtaining optimal results.

TECHNICAL VISUALIZATION

technical drawing of the control panel

Display
1 - Status display
2 - Display of the internal or external temperature value (T-int or T-ext)
3 - Soft-key bar

Control panel
4 - Soft keys, left and right
5 - Enter key
6 - Cursor keys for Up, Down, Left and Right.
7 - T max key: display and adjustment of the overtemperature switch-off point

technical drawing of the thermostat connections

1 - USB interface
2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module
and contact module
3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module
4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S
5 - Rating label
6 - Connection socket 51H for power supply between the control head and cooling underpart
7 - Mains connecting lead

technical drawing of the thermostat and bath - front

1 - Cooling coil connections
2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S)
3 - Four feet

technical drawing of the thermostat and bath - back

1 - Mains connecting lead
2 - Rating label
3 - Bath draining tap
4 - Bath drain point

Temperature °C
20...200
External dimensions mm L x P x A
350x803x428
Pump pressure max. bar
0.55 bar
Pump delivery max. l/min.
22 L/min
Tank volume l
40 L
Power W
2 Kw
Series
ECO Silver
Bath measures WxDxH (mm)
300 x 613 x 200
Weight kg
17.2
Supply
230 V / 50-60 Hz

Options or connected products

Product added to compare.